Sontay
Showing 1–17 of 56 results
-
Read moreMORE INFO
OC-W-LV Wall Mounted PIR Occupancy Detector
Sontay Occupancy Detector
The OC-W-LV is a passive infra-red detector for monitoring through moving body heat. Detection of occupancy causes the internal SPDT relay to activate. The volt free contacts in the OC-W-LV ensure compatibility with a vast array of equipment.
-
Read moreMORE INFO
LL-W-V Wall Mounted Internal Light Level Sensor
Sontay Internal Light Level Sensor
Our range of light level sensors output a linear 0-10Vdc signal representing the lux level at the sensor element. This is typically used in lighting strategies to optimise energy efficiency through dimming and/or disabling of lights as required.
-
Read moreMORE INFO
LL-E-V External Light Level Sensor
Sontay Light Level Sensor
The Sontay LL-E-V is a light level transmitter designed for use in the active control of artificial lighting, both to optimise and to achieve maximum energy efficiency. The LL-E-V is typically used in lighting strategies to optimise energy efficiency through dimming and/or disabling of lights as required.
-
Read moreMORE INFO
LL-C-V Ceiling Mounted Internal Light Level Sensor
Sontay Light Level Sensor
Our range of light level sensors output a linear 0-10Vdc signal representing the lux level at the sensor element. This is typically used in lighting strategies to optimise energy efficiency through dimming and/or disabling of lights as required.
-
Read moreMORE INFOI/O-RM Relay Modules
Sontay Relay Modules
This range of relay modules is intended for use with BMS controllers to convert an analogue control output to various switching relay modes. Example applications include the control of raise/lower valves, damper actuators, pump changeover and boiler control.
-
Read moreMORE INFO
LL-C-M Lighting Controller
Sontay Lighting Controller
The LL-C are designed to give savings over uncontrolled lighting whilst retaining an ease of installation and configuration. A passive infra-red detector monitors occupancy through moving body heat and a photo-sensitive device monitors light level.
-
Read moreMORE INFO
I/O-IIM Input Isolation Module
Sontay Input Isolation Module
Intended for use with BMS controllers wherever the output signal requires isolation from the supply ground. The IO-IIM accepts either a current loop or voltage input. The module is powered by 24Vac and provides a 24Vdc supply up to 100mA for the sensors.
-
Read moreMORE INFO
I/O-ARM – Analogue Re-Scaling Module
Sontay Analogue Re-Scaling Module
For signal rescaling, the IO-ARM can accept either a voltage or current input which can be rescaled to either a voltage or current output. The signal rescaling is achieved by using the trimming potentiometers and jumpers links.
